Dock Firewall is an add-on to your current DroneDeploy Dock subscription. This feature provides the necessary network configurations to securely operate your DJI Dock hardware through your organization's firewall.
Availability
Dock Firewall is available for all paid DroneDeploy Aerial subscriptions as an add-on cost. If you are interested in Dock Firewall, please contact your Customer Success Manager or the Support team at support@dronedeploy.com.
How to set up Dock Firewall
To set up Dock Firewall, work with your IT team to add the following rules to your firewall. Assign these rules higher priorities, as existing rules in the firewall can potentially impact the network traffic over the required protocols or ports.
Note: These IP addresses represent the only outbound traffic that should be allowed for your DJI Dock. Block all inbound connection requests. These rules are required for the dock hardware to function. You still need access to the DroneDeploy platform (dronedeploy.com) if you are accessing it from the same network.
Network requirements
MQTT Message Bus
IP Address: 35.237.102.110, 34.23.16.139
Networking Protocol: TCP
API Protocol: MQTTS
Ports: Outbound 8883
Transport Encryption: TLSv1.2
Supported Networking Technologies: Ethernet
Bandwidth Requirements: Minimum 15 Mbps upload and download
Streaming Video
IP Address: 35.231.19.42, 35.231.101.33
Networking Protocol: TCP
API Protocol: RTMPS
Ports: Outbound 1937
Transport Encryption: TLSv1.2
Supported Networking Technologies: Ethernet
Bandwidth Requirements: Minimum 15 Mbps upload, with 25+ Mbps upload recommended
Media Upload
IP Address: 34.23.192.227, 35.190.138.162, 35.241.29.212, 34.49.27.181
Networking Protocol: HTTPS over TCP
API Protocol: S3
Ports: Outbound 443
Transport Encryption: TLSv1.2 or greater
Supported Networking Technologies: Ethernet
Bandwidth Requirements: Minimum 15 Mbps upload, with 25+ Mbps upload recommended
NTP time synchronization
IP Address: ntp.ubuntu.com
Networking Protocol: NTP over UDP
API Protocol: NTPv4
Ports: Outbound 123
Transport Encryption: None (used only for time synchronization)
Supported Networking Technologies: Ethernet
Bandwidth Requirements: Very low
v2.2