The M3E and M3T are supported drones for use with the DroneDeploy platform. This article explains how to use the DroneDeploy app with the Mavic 3 Enterprise series and offers best practices for flying with this hardware.
How to install the DroneDeploy Flight App
- On your DJI RC Pro Enterprise or DJI RC Plus controller, search for dronedeploy.com/flightapp
- Tap the link 'Download 5.XX.0' to download the DroneDeploy Flight app
- Wait for the app to complete the download
- Accept ALL DroneDeploy Flight app permissions
- Log in to your DroneDeploy account.
Best Practices
- Force-stop the DJI Pilot 2 app before opening the DroneDeploy app
- To force stop DJI Pilot 2, go to the device Settings > Apps & notifications > DJI Pilot 2 > Force Stop.
- Dewarping should be turned OFF to capture for photogrammetry
- Fly with RTK following DroneDeploy's Instant RTK Workflow. RTK is only available for Advanced, Small Business, or Enterprise subscriptions.
- To have the DroneDeploy app automatically open each time you power up the controller, go to 'Settings> 'Apps & Notifications> 'Auto start application selection'> DroneDeploy
-
Allow all permissions by going to Settings> Apps & Notifications> DroneDeploy > Permissions>
- Allow location
- Allow storage
- Allow phone network
Known Limitations
When using the Mavic 3 Enterprise with the DroneDeploy app, some features may have limitations as listed below:
- Live Streaming
- Compass Calibration
- Zoom
- Manual Panoramas
FAQs
Q: What type of flights does the M3E support?
A:
- Standard 2D maps
- Enhanced 3D maps (Crosshatch & perimeter)
- Stand Count
- Video missions
- Manual flight
- Panoramas
- Photo Reports
- Corridor
- Facade/Vertical
- Mobile Upload
- Live Map
- Offline mapping
- Terrain Awareness
Q:Why are you no longer releasing updates to the Amazon App Store?
A: We are no longer releasing updates to the Amazon App Store. We can now host and update the DroneDeploy Flight app, meaning we don’t need a third-party app distribution service.
Q: Does the Mavic 3E have a mechanical shutter?
A: Yes, the Mavic 3 Enterprise has a mechanical shutter. However, the Mavic 3 Thermal does not.
Q: Can I use DroneDeploy on other DJI smart controllers?
A: No, the DroneDeploy app is currently only compatible with the DJI RC Pro Enterprise and Plus Enterprise Controllers.
Q: Where can I buy a Mavic 3 Enterprise series drone?
A: DJI Enterprise dealers, such as Drone Nerds, are the recommended vendors selling the Mavic 3 Enterprise series of drones. You'll be able to find a dealer near you here.
Check out the DroneDeploy exclusive bundles from our partners at Drone Nerds:
Q: How can I connect my RC Pro Enterprise Controller to the internet?
A: Connecting to a Wi-Fi network or tethering to your mobile device's hotspot.
Q: Is it expected that the Mavic 3E flies much faster than other drones?
A: Yes, as the Mavic 3E has a shooting interval of 0.7 seconds, it can capture images much faster than other drones while maintaining the same (and even higher) quality of images thanks to its mechanical shutter. It is expected to see the M3E fly at speeds up to 36mph (depending on your map size and altitude).
Q: Can I turn on the beacon light when flying with DroneDeploy?
A: You can turn the beacon on in the DroneDeploy app before or during the flight. To do so, tap the gear icon in the upper right corner of the app and toggle on the 'Beacon' (see screenshot below).
2.1